Brand Name	Sikkens
Colour	Light Oak, Dark Oak, Walnut, Ebony, Mahogany, Rosewood, Olive, Pine, Teak, Colour
Material	Solvent-borne
Wear Type	Exterior
Type	Woodstain
Protects From	mould and algae, UV radiation
Waterproof	Yes
Coverage	7 - 14 m²/litre
Pack sizes	1, 2.5 and 5 litre cans. Some colours are available in 20 litre containers.
Key benefits	Highly translucent to bring out the beauty of woodgrain, Protects against mould and algae, Resistance to UV radiation, peeling and cracking, Microporous and water-repellent
Applications	Finishing coat: Exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. Base stain: Exterior softwood and hardwood joinery, windows and doors.

Sikkens Cetol HLS Plus Translucent Woodstain is a low build, solvent-borne semi-gloss woodstain used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae, and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent. It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing.

Brand Name	Sikkens
Colour	Dark Oak
Material	Woodstain
Manufacturer Model No	CHLSPDO1L
Type	Exterior Door & Window Care
Protects From	mould and algae, UV radiation, peeling and cracking
Waterproof	water-repellent
Stain Type	Woodstain
Size (ml)	1000

Brand Name	Sikkens
Material	wood
Wear Type	exterior
Type	woodstain
Protects From	mould and algae, UV radiation, peeling and cracking
Product Type	Wood Stain
Short Description	A low build, solvent-borne, semi-gloss woodstain. Can be used both as a base stain and as a finishing coat.
Drying time (recoat)	18-24 hours
Drying time (touch dry)	4-6 hours
Suitable Surface	Lattices, Doors, Smooth Sawn Siding, Window frames, Fences, Sidings, garden shed, pergola, Shutter, carport, Shed, Door frames, Windows, Rails, Rough Sawn Siding
Coverage	7-14 m²/L
General No. of Coats	3
Application description	Conditions : Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods. Protect from frost and rain until dry.Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Initial Procedure Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol HLS plus is supplied ready for use. Do not thin.Applying the product For best results use a good quality, long-haired, soft bristle brush. On new work, where practical, the initial coat should be applied all round prior to fixing. P ay special attention to any areas of exposed end grain, tops and bottoms of doors, and undersides of cills.The product should be applied in a full flowing coat (working well into joints, and ensuring end grains or sawn timbers are saturated with product). Excess surface material should be re-distributed after 5-20 minutes (depending on conditions), using a dry brush (which should be periodically dried with a lint-free cloth) and the minimum number of strokes required to produce an even overall colour. This ensures that the first coat satisfies the porosity/absorption of the timber. Allow a minimum of 18-24 hours drying time. Where appropriate (e.g. for joinery items such as windows and doors), the first coat should be carefully denibbed using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain. Do not break through the surface coating. Remove all dust.Cetol HLS plus should be applied in a full flowing manner in the direction of the grain, using the minimum number of brush strokes necessary to produce an acceptable finish. Avoid overbrushing, as this will reduce the protection afforded.Subsequent coatings should be applied as soon as possible after the previous coat has dried, but no sooner than 12-24 hours, in order to provide full protection. In any event this period should not extend beyond three months, otherwise additional preparation and coats may be necessary. If applied to exterior timber and the contract is of long duration, it is suggested that a further coat be applied prior to handover to make good any weathering during the construction period
Cleaning	Clean brushes and equipment with brush cleaner immediately after use. If spilled, Cetol HLS plus may be removed immediately while still wet, using white spirit
Storage	Store in cool, dry, frost-free conditions

Brand Name	Sikkens
Colour	Light Oak
Material	None
Manufacturer Model No	5085898
Wear Type	None
Type	Woodstain
Certifications Met	None
Country of Origin	None
Protects From	mould and algae, UV radiation, peeling and cracking
Waterproof	None
Number of Pockets	None
Waist Size	aa87ci11gu
Toilet Cistern Capacity	FTW--Size2.5 L
Interior or Exterior Use	Exterior
ERP Rating	Not Applicable
Drying time between coats	18 - 24 hrs
Drying Time	4 - 6 hrs
Colour Family	Browns
Application Method	Brush
Supplier Part Number	5085898

Brand Name	Sikkens
Colour	006 Light Oak
Material	Solvent-Based
Manufacturer Model No	HA651506F
Wear Type	N/A
Type	Wood stain
Certifications Met	N/A
Country of Origin	N/A
Protects From	High UV resistance against light damage
Waterproof	N/A
Number of Pockets	N/A
Size	5L
Application Methods	Brush
Coverage	Up to 14sq/m per litre
VOC level	High
Thinning	Not Recommended
Touch dry	4-8 hours
Recoatable	12-24 hours
Suitable for...	Exterior use
Scrubbability	Washable
Colour type	Ready Mixed
Finish	Satin
Cleanup	Brush cleaner or White spirit
Base	Solvent-Based