Fitting Instructions 1) Cut door aperture to the appropriate dimensions | 2) Separate the two letterplate halves and place the exterior gasket over metal fixing posts | 3) Take the half that contains brushes and insert into the aperture from the inside of the door | 4) Take the exterior half (with gasket) and slide into the letterplate tube from the outside of the door | 5) Before fixing. Take time to ensure the letterplate fully covers the aperture on both sides and that the exterior gasket does not protrude | 6) Use either the 2 short OR 2 long bolts (depending on your door thickness) and screw into centre hole at either end of the letterplate, ensuring that you DO NOT TO OVER TIGHTEN fixings |

Brand Name	Keypak
Colour	Black/Satin Anodised Aluminium
Material	Aluminium
Manufacturer Model No	5010952003979
Type	Letterbox
Product height	70mm
Product thickness	40mm
Product width	270mm
Guarantee	Statutory
Features and benefits	INTERNAL DRAUGHT EXCLUDER – The integrated brushes help prevent draughts. Plus, an internal water seal prevents water leaks as it stops water getting into the door or panel. ANTI-SNAP FLAP – External and internal flaps open up to 180 degrees for easy access without risk of snapping. ADJUSTABLE SLEEVE – The telescopic design means the letter box can be adjusted to fit doors between 40mm to 80mm in thickness. Our letter box will fit most uPVC, Composite & Timber doors that require 10" letterboxes. EASY INSTALLATION – With adjustable sleeves, these letter boxes are suitable for uPVC panel doors ranging from 40-480mm in thickness. Simply insert and tighten using either the short or long provided screws depending on your door thickness.