Brand Name	Cuprinol
Colour	Forest oak
Material	N/A
Manufacturer Model No	5010212650936
Wear Type	N/A
Type	Wood paint
Certifications Met	N/A
Country of Origin	N/A
Protects From	weathering
Waterproof	N/A
Number of Pockets	N/A
Application method	Brush or spray
Base	Water-based
Colour group	Brown
Coverage	3m ²
Drying time	6 h
Finish	Matt
Location	Exterior
Paint type	Treatment
Recoat time	2-6 hours
VOC level	Low
Volume	5000ml
Product code	5010212650936

Cuprinol One Coat Sprayable Fence Treatment has been specially formulated to work with the Cuprinol Sprayers to colour and protect rough sawn timber in a fraction of the time. Its special pigments ensure rich colour and even coverage in just one coat. Cuprinol One Coat Sprayable Fence Treatment is quick drying, low odour and safe to use around plants and pets.

Brand Name	Cuprinol
Material	Wood
Type	Fence Treatment
Protects From	weather
Product Type	Other
Suitable Surface	Wood
Coverage	5L covers up to 15m2 with 1 coat or 5 fence panel sides
General No. of Coats	1
Application description	Shake the pack thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply using the appropriate Cuprinol sprayer for the product. As with any sprayer it may take a couple of minutes to perfect your technique. Ensure you stand at the correct distance with the nozzle 15-30cm (6"-12") from the wood surface. Begin slowly and increase the pace as you get used to spraying. Take care not to spray too quickly as this may result in an uneven finish. Similarly, spraying too slowly will result in excess product being applied causing runs. Should this happen, simply brush into the wood. Avoid spraying surrounding plants, brickwork, glass, PVCu, etc. Overspray can be minimised by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. If applying by brush, apply evenly, avoiding splashing surrounding plants, brickwork, glass, PVCu, etc. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before the product has dried. Cover any surfaces nearby to protect from overspray. Allow 2-6 hours between coats under normal weather conditions. Where a strong colour change is involved, more coats may be required. Product performance will be reduced if applied to grey and weathered smooth wood. If using more than one pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack.
Cleaning	When finished, any unused product can be returned to the pack and stored for future use. Clean the Cuprinol Sprayer with water in accordance with the user guide
Storage	Do not use or store in extremes of temperature or wet conditions
Disposal	Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk

The Cuprinol One Coat Sprayable Fence Treatment is specially formulated to work with the Cuprinol sprayer to colour and protect rough sawn timber in a fraction of the time. Its special pigments ensure rich colour and even coverage in just one coat. Cuprinol one coat sprayable fence treatment is quick drying, low odour and safe to use around plants and pets.

Brand Name	Cuprinol
Colour	Forest oak
Material	Water based
Manufacturer Model No	32091000
Type	Shed & fence treatment
Country of Origin	UK
Size	5 L
Interior or Exterior Use	Exterior
Suitable for	Wood
Colour Family	Browns
Drying Time	6 hours
Drying time between coats	2-6 hours
Coverage per Litre	3 m2
Application Method	Brush or spray
VOC Level	Minimal
Base	Water
Finish	Matt