This Evolve Polished Copper trailing edge double dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting. This switch has a low profile screwless front plate that clips on and off, making it ideal for modern interiors.

Brand Name	British General
Colour	Gloss Copper
Manufacturer Model No	PCDCP82B
Type	Dimmer Switch
Guarantee	25 years
Push on/off	with rotary dimming
Compatible with	Dimmable LED, tungsten/incandescent, halogen and dimmable CFL lighting
Terminals accept	up to 2.5mm² cable
200W Rated	(100W LED)
Easy to install	supplied with fixing screws and installation instructions
Adjust your light level	for mood setting as well as energy saving with 2 way on/off
Trailing (lagging) edge dimmer	suitable for dimming LED, dimmable CFL's and traditional lighting
Soft start	brings the lights to a set level in around 1 second and extends the life of lamps
Overload protection	prevents failure if you mistakenly connect your dimmer to too many lights or transformers and will turn the lights down or off until the load is corrected
Silent operation	no noise when dimming
Support for lower wattage lamps	eliminates flicker
Rotary dimmer control	with push on/off function
Screwless front plate	clips on and off easily ideal for redecorating
Pack quantity	1
Number of ways	2
Power voltage supply	Mains fed
Screwed/screwless	Screwless
Number of gangs	2
Product width	86mm
Product height	86mm
Maximum dimmable load (incandescent)	200W
Maximum dimmable load (halogen)	200W
Maximum dimmable load (fluorescent)	100W
Maximum dimmable load (LED)	100W
Minimum dimmable load (fluorescent)	5W
Minimum dimmable load (halogen)	20W
Minimum dimmable load (incandescent)	5W
Minimum dimmable load (LED)	5W
Waveform	Trailing edge
Amp rating	0.8A
Volt-amperes	200VA
Insert colour	Black
Voltage suitability	Mains voltage
Product code	5050765226202

This Evolve Polished Copper trailing edge double dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting.

Brand Name	British General
Colour	Gloss Copper
Material	N/A
Manufacturer Model No	PCDCP82B
Wear Type	N/A
Type	Dimmer Switch
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Pack quantity	1
Number of ways	2
Power voltage supply	Mains fed
Screwed/screwless	Screwless
Number of gangs	2
Product width	86mm
Product height	86mm
Maximum dimmable load (incandescent)	200W
Maximum dimmable load (halogen)	200W
Maximum dimmable load (fluorescent)	100W
Maximum dimmable load (LED)	100W
Minimum dimmable load (fluorescent)	5W
Minimum dimmable load (halogen)	20W
Minimum dimmable load (incandescent)	5W
Minimum dimmable load (LED)	5W
Waveform	Trailing edge
Amp rating	0.8A
Volt-amperes	200VA
Insert colour	Black
Voltage suitability	Mains voltage
Product code	5050765226202

Evolve double master trailing edge touch dimmer switch that controls light levels and sets mood. Intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload. Suitable for dimming LED, dimmable CFLs and traditional lighting. Soft-start brings the lights to a set level in around 1 second and extends lamp life. Silent operation means no noise when dimming, while support for low wattage lamps eliminates flicker. Low profile screwless flat plate that clips on and off, ideal for modern interiors.

Brand Name	British General
Manufacturer Model No	PCDCPTDM2B
Dimmer Switch Operation	Touch
Insert Colour	Black
Max. Dimmable Load (LED)	100 W
Min. Dimmable Load (LED)	5 W
No. of Ways	2 Way
Number of Gangs	2 Gang
Switch Operation	Dimmer
Terminal Capacity	Terminals accept up to 2.5mm² cable
Waveform	Trailing Edge